40
MAINTENANCE & CLEANING
(DEPENDING ON MODEL)
602163
Be sure to unplug the appliance from the power supply and wait
for the appliance to cool down.
Children should not clean the appliance or perform maintenance
tasks without proper supervision.
Aluminium finish
Clean the aluminium finish with non-abrasive liquid cleaners intended for such surfaces.
Apply the cleaner onto a wet cloth and clean the surface. Then, rinse the surface with
water. Do not apply the cleaner directly onto the aluminium finish.
Do not use abrasive cleaners or sponges.
Note: The surface should not come into contact with oven cleaning sprays as this may
result in visible and permanent damage.
Stainless steel sheet front side of the housing
(depending on the model)
Clean this surface only with a mild detergent (soapsuds) and a soft sponge that will not
scratch the finish. Do not use abrasive cleaners or cleaners containing solvents as they
may damage the housing finish.
Lacquer-coated surfaces and plastic parts
(depending on the model)
Do not clean the knobs and buttons, door handles, stickers, and rating/type plates with
abrasive cleaners or abrasive cleaning materials, alcohol-based cleaners, or with alcohol.
Immediately remove any stains with a soft non-abrasive cloth and some water, in order to
avoid damaging the surface.
You may also use cleaners and cleaning materials intended for such surfaces as instructed
by their respective manufacturers.
The aluminium-coated surfaces should not come into contact with oven cleaning
sprays as this may result in visible and permanent damage.