4.5 Connecting the power
4.5.1 Connect the output connector of AC-to-DC Transformer to the "DC
12V IN" socket of the Repeater Amplifier.
4.5.2 Attach the plug of the AC-to-DC Transformer to the wall socket. The "
POWER " indicator on the Repeater Amplifier will light up.
4.6 Testing
Test each corner of interior with your iDEN phone.
5. TROUBLESHOOTING
In the event of communications difficulty, check the following before seeking
Technical Support:
•
Is the " POWER " indicator lit, showing that the power supply is connected?
"
Check if the power connector is loose.
•
Is the receiving scale on the iDEN phone too low to make a call?
"
Check if the connectors between the Indoor Antenna and the Outdoor
Antenna are loose.
•
Is the receiving scale on the iDEN phone adequate but can not make a call?
"
The Repeater Amplifier might oscillate itself. Please increase the distance
between the Outdoor Antenna and the Indoor Antenna. The Distance
should be at least 3 feet.
6. SPECIAL APPLICATION
In large areas like a department store, parking lot or hotel, one Repeater
Amplifier may not be sufficient and several or many Repeater Amplifier units
or a High Gain Repeater Amplifier may be necessary. In such cases, contact
your dealer for larger area coverage solution.
CAUTION
Applying power may damage to this device if the Outdoor Antenna and Indoor
Antenna are not connected properly.
