Oracle Audio Technologies
20
Note :
The tapered washer has been designed to help flatten warped records. It is not recommended to use it
with thicker vinyl records because they have less flexibitity. Furthermore the tapered washer in not needed if the
record in not warped. When using the tapered washer do not over tighten the record clamp because this could
damage your albums by cracking the center hole. A good way to evaluate the proper tension of the clamp is to
use the tip of a pencil and tap the inner groove of the record while tightening the clamp. The taping sound will be
hollow at the beginning and will gradually become more solid. This indicates that the record clamp tension is
correct.
LEVEL YOUR DELPHI MK VI
Your turntable is now ready to be moved to its final location.
•
Level the acrylic base by turning the levelling feet. Use the sub-chassis spirit level to complete this final
adjustment since the proper, relative level has already been established between the sub-chassis and
the acrylic base in a previous operation.
•
Retreive the suspension caps from the packaging and thread them on the suspension stems to
complete your assembly of your Oracle Delphi mK VI
Important note :
Whenever you have to either carry your turntable or remove the platter, always remove the
suspension caps to prevent any metal to metal contact between the sub-chassis and the caps which would
damage to the clear protective coating on the aluminum parts of your Delphi MK VI.
