Oracle Audio Technologies
9
Note :
We have been using with great success the Adjust Plus computer program and test record system
designed by Dr. Chris Feickert in Germany. We can assure you that this is a very efficient and accurate system
to obtain the best possible Azimuth alignment for your phono cartridge. We can also testify that this calibration
can not be achieved by simply eyeballing the stylus ! The optimal Azimuth calibration will allow to best possible
Right and Left channel separation. The system also allows to reach the optimal phase coherency between Right
and Left channel. Other tools are available for an optimal Azimuth calibration.
•
Check the stylus pressure using an accurate gauge and adjust it to the
cartridge manufacturer's
specifications
.
•
Install the stylus guard to complete the assembly of your Delphi Mk VI. Do not install the phono lead at
this time. If there is no stylus guard for your phono cartridge use a tie wrap to secure the tone arm tube
in the arm rest support.
You are now ready to complete the assembly of your Oracle Delphi MK VI …
•
Remove the platter from the spindle holder and set it aside
•
Secure the arm tube of the tone arm in the arm rest with a tie-wrap to prevent it from swinging out while
handling the sub-chassis
•
Gently lift the sub-chassis / tone arm / cartridge assembly and set it aside to be able to complete the
assembly of the turntable plinth. Use the white foam blocks to safely support it.
ASSEMBLE AND LEVEL THE PLYNTH ASSEMBLY
•
Retrieve the 3 Silicone reservoirs and mounting screws from the bottom section of the foam packaging.
•
Mount the Silicone reservoirs on the acrylic base as shown on the picture.
•
Secure the screw lightly using the 3/16
th
allen key.