Oracle Audio Technologies
Paris PH200 phono stage
7
SPECIFICATIONS
Frequency response : 20Hz - 20KHz @ +/- 1dB
Total Harmonic Distortion : <0,05% @ 20Hz
– 20kHz
Moving Coil input load impedance : 100, 200, 511, 1k, 1.5k and 47k Ohms
Moving Magnet input load impedance
47k Ohms
MM capacitive load:
150 picofarad
Input sensitivity : 0,2mV and up
Gain options : 41.5db, 52db, 62db
Gain selection for MM cartridge : Must be set at 41.5 dB & 47k Ohms
Signal to noise ratio :
> -80dB
WARRANTY
Your new Oracle Paris PH200 carries a transferable, 2 year parts and labor limited
warranty against operation defects under
“normal use”
or manufacturing defects.
Oracle Audio Technologies will repair the defective item within this warranty period. The
original bill of sale from an authorized dealer or distributor is required for any warranty
repair. If the original bill of sales cannot be shown as a legitimate proof of purchase date
then the serial number will be used to determine the ship date from the factory and the
warranty coverage will be 2 years and 6 months from the shipping date from the factory.
Explanation of the term
“normal use” :
- Using the PH200 for the application it was designed which is as a phono
amplifier.
- The unit has been connected rigorously according the information supplied in the
owner’s manual.
Maintenance and service :
Any repair and/or modification done to the PH200 must be carried by an Oracle Audio
authorized service center or directly at the Oracle Audio factory. For more information
please contact your dealer, distributor or contact us directly at Oracle Audio.
Any repair and / or modification done to your PH200 without prior authorisation from
Oracle Audio will void the warranty.
