manualshive.com logo in svg

Oracle 5.0, Reference Manual

Introducing Uconnect 5.0 - the ultimate automotive technology! Unlock the full potential of your vehicle with our cutting-edge system. For a seamless experience, don't forget to grab your User Manual, available for free download at 88.208.23.73:8080. Master your Uconnect 5.0 today!

Share
Download
background image

Signature Checking Using 

GnuPG

52

1 new user ID

gpg: key 5072E1F5: "MySQL Release Engineering <mysql-build@oss.oracle.com>"

53 new signatures

gpg: no ultimately trusted keys found

gpg: Total number processed: 1

gpg:           new user IDs: 1

gpg:         new signatures: 53

If you want to import the key into your RPM configuration to validate RPM install packages, you should
be able to import the key directly:

shell> 

rpm --import mysql_pubkey.asc

If you experience problems or require RPM specific information, see 

Section 2.6.4, “Signature

Checking Using 

RPM

”

.

After you have downloaded and imported the public build key, download your desired MySQL package
and the corresponding signature, which also is available from the download page. The signature file
has the same name as the distribution file with an 

.asc

 extension, as shown by the examples in the

following table.

Table 2.1. MySQL Package and Signature Files for Source files

File Type

File Name

Distribution file

mysql-standard-5.0.96-linux-i686.tar.gz

Signature file

mysql-standard-5.0.96-linux-i686.tar.gz.asc

Make sure that both files are stored in the same directory and then run the following command to verify
the signature for the distribution file:

shell> 

gpg --verify package_name.asc

If the downloaded package is valid, you will see a "Good signature" similar to:

shell> 

gpg --verify mysql-standard-5.0.96-linux-i686.tar.gz.asc

gpg: Signature made Tue 01 Feb 2011 02:38:30 AM CST using DSA key ID 5072E1F5

gpg: Good signature from "MySQL Release Engineering <mysql-build@oss.oracle.com>"

The 

Good signature

 message indicates that the file signature is valid, when compared to the

signature listed on our site. But you might also see warnings, like so:

shell> 

gpg --verify mysql-standard-5.0.96-linux-i686.tar.gz.asc

gpg: Signature made Wed 23 Jan 2013 02:25:45 AM PST using DSA key ID 5072E1F5

gpg: checking the trustdb

gpg: no ultimately trusted keys found

gpg: Good signature from "MySQL Release Engineering <mysql-build@oss.oracle.com>"

gpg: WARNING: This key is not certified with a trusted signature!

gpg:          There is no indication that the signature belongs to the owner.

Primary key fingerprint: A4A9 4068 76FC BD3C 4567  70C8 8C71 8D3B 5072 E1F5

That is normal, as they depend on your setup and configuration. Here are explanations for these
warnings:

• gpg: no ultimately trusted keys found: This means that the specific key is not "ultimately trusted" by

you or your web of trust, which is okay for the purposes of verifying file signatures.

• WARNING: This key is not certified with a trusted signature! There is no indication that the signature

belongs to the owner.: This refers to your level of trust in your belief that you possess our real public
key. This is a personal decision. Ideally, a MySQL developer would hand you the key in person,
but more commonly, you downloaded it. Was the download tampered with? Probably not, but this
decision is up to you. Setting up a web of trust is one method for trusting them.

See the GPG documentation for more information on how to work with public keys.

Summary of Contents for 5.0

































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 5.0

Altigen AltiWare OE 4.6 Administration Manual preview
AltiWare OE 4.6
Brand: Altigen Pages: 518
F-SECURE CLIENT SECURITY 9.00 - QUICK Quick Installation Manual preview
CLIENT SECURITY 9.00 - QUICK
Brand: F-SECURE Pages: 32
Tascam GigaStudio 3.04 Supplement Sheet preview
GigaStudio 3.04
Brand: Tascam Pages: 2
Inalp Networks SmartWare R2.00 Software Configuration Manual preview
SmartWare R2.00
Brand: Inalp Networks Pages: 321
ProfiNet ProfinetCommander User Manual preview
ProfinetCommander
Brand: ProfiNet Pages: 25
Primera PrimoDVD User Manual preview
PrimoDVD
Brand: Primera Pages: 19
Blackberry WINDOWS LIVE MESSENGER - LEARN MORE User Manual preview
WINDOWS LIVE MESSENGER - LEARN MORE
Brand: Blackberry Pages: 18
Creative Platinum eX User Manual preview
Platinum eX
Brand: Creative Pages: 84
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Installation Manual preview
CLUSTER SUITE FOR ENTERPRISE LINUX 4.5
Brand: Red Hat Pages: 110
AVG ANTI-VIRUS 8.5 User Manual preview
ANTI-VIRUS 8.5
Brand: AVG Pages: 234
DeLorme XMap 7 GIS Getting Started Manual preview
XMap 7 GIS
Brand: DeLorme Pages: 29
Altigen AltiSupervisor Manual preview
AltiSupervisor
Brand: Altigen Pages: 34
Oracle B31540-02 Implementation Manual preview
B31540-02
Brand: Oracle Pages: 110
Autodesk AUTOCAD P AND ID 2010 Brochure preview
AUTOCAD P AND ID 2010
Brand: Autodesk Pages: 4
Autodesk 657B1-000110-S001 - Maya - Mac Getting Started Manual preview
657B1-000110-S001 - Maya - Mac
Brand: Autodesk Pages: 5
Autodesk 15606-011408-9005 - MAP R6.3 NAMED-10U PK Tutorials Manual preview
15606-011408-9005 - MAP R6.3 NAMED-10U PK
Brand: Autodesk Pages: 332
Red Hat NETWORK - USER 1.2 User Reference Manual preview
NETWORK - USER 1.2
Brand: Red Hat Pages: 64
Saitek WII GAMESHARK CHEAT SAVES AND MEDIA MANAGER Manual preview
WII GAMESHARK CHEAT SAVES AND MEDIA MANAGER
Brand: Saitek Pages: 15

Brands by name

Popular brands

Load more brands