Note:
Refer to the ACSLS documentation for release levels which support the
Expanded Mailslot Configuration.
Select the mailslot type from the list that corresponds to your configuration:
•
Standard Mailslot (4 slots)
•
Expanded (19 slots)
2.
Set the system reserved slots.
System reserved slots are storage slots in the SL150 library typically used to
house cleaning tapes or diagnostic tapes. Use the System Reserved Slots list
to select the desired number of slots (see
Determine the Required Number of
•
No reserved slot
•
1 reserved slot
•
2 reserved slots
•
3 reserved slots
3.
Set the volume label format. Use the Volume Label Format list to select the
desired number of slots and then tap Next.
To accommodate various cartridge labeling schemes, the SL150 library supports
labels eight to 14 characters long and provides a label windowing feature that
lets you specify how the labels should be interpreted by the host application. See
for a description of the format types.
Configure the Library Step 6 of 6: Review and Apply Initialization
Settings
Verify all settings are correct before applying the configuration.
1.
Verify the value of each initialization setting (tap Previous to alter any incorrect
value before applying changes).
2.
To verify the network settings, tap the Settings button on the Home screen, and
then tap the Network Port 1 and Network Port 2 tabs.
3.
If all settings are correct, tap Apply.
4.
The library restarts. The duration of the restart depends on the size of library.
Chapter 2
Configure the Library After Powering-on for the First Time
2-39
