Power Configurations
Library Overview
1-13
Example: Calculating Required Number of Drive DC Power Supplies
The example library has a Base module and a DEM with all three drive types (T10000,
T9840, LTO).
and
show how to calculate the total watts used by the
tape drives in the Base module and DEM:
The drives in the Base module use 1,546 W. In
, 1,546 W exceeds the
maximum 843 W supported by a 120 VAC PDU. Therefore, the Base module requires a
240 VAC PDU to support the drive configuration — refer to
.
The drives in the DEM use 756 W. In
, either a 120 VAC or 240
VAC PDU can support 756 W. However, you cannot mix 120 VAC with 240 VAC PDUs
within the library. Therefore, the example library requires 240 VAC PDUs.
Two tape drive DC power supplies ship standard with the Base module and two
power supplies ship standard with the DEM. Therefore, subtract two from the DC
supplies required. Use
to determine what to order.
The tables below list the power supplies required for the example library.
Table 1–5
DC Power Supplies for DEM (240 VAC PDU)
Total Watts Used
by All Drives
Power Supplies
Required for N+1
Power Supplies
Required for 2N
Power Supplies
Required for 2N+1
1 - 1,200
2
2
4
1,201 - 2,400
3
4
6
2,401 - 3,600
4
6
8
3,601 - 4,443
5
8
8
Table 1–6
Base Module Tape Drive Watts Consumption Example
Drive Type
Quantity of Drives
Multiply by Watts
Per Drive
Total Watts Per
Drive Type
T10000D
6
127
762
T9840D
6
100
600
LTO7
4
46
184
Table 1–7
DEM Tape Drive Watts Consumption Example
Drive Type
Quantity of Drives
Multiply by Watts
Per Drive
Total Watts Per
Drive Type
T10000C
4
93
372
T9840D
2
100
200
LTO5
4
46
184
Table 1–8
DC Supplies Required for Base Example
Configuration Option
DC Supplies
Required
DC Supplies to Order
(= Required - 2)
N+1 (240 VAC PDU)
3
1
2N (240 VAC PDU)
4
2
2N+1 (240 VAC PDU)
6
4
Summary of Contents for StorageTek SL3000
