Installing the Switch
71
3. Turn the right retainer bolt 1/4 turn counter-clockwise.
Caution –
Do not turn the retainer bolts more than 1/4 revolution each time.
Turning more than 1/4 turn damages the midplane stiffener and midplane XBOW
connectors.
4. Repeat
and
until you feel very little resistance to turning and the
midplane stiffener is extended approximately 10 mm (1/2 in.) from the front of
the chassis.
5. Grasp the handles at both ends of the midplane stiffener and slowly pull it
from the chassis.
