Install a Power Supply
126
Sun Server X4-4 Service Manual • October 2015
This action of rotating the handle upward draws the power supply into the server and engages it
with the internal connector.
7.
Connect the AC power cord to the power supply.
8.
Verify that the AC Present indicator is lit.
“Power Supply Reference” on page 126
9.
Verify that the following indicators are not lit:
■
Service Action Required indicator on the power supply
■
Front and back Service Action Required indicators
■
Rear PS Failure indicator on the bezel of the server
See
“Server Front Panel Features” on page 19
“Server Back Panel Features” on page 20
for locations of system indicators.
10.
If you performed a cold-service procedure, power on the server.
Power Supply Reference
The server has two power supplies. The two-power supply configuration ensures redundancy.
This allows the server to operate when one of the power supplies fails. However when the
Summary of Contents for Sun Server X4-4
