Back Panel Features
Back Panel Status Indicators and Buttons
The following figure shows the back panel indicators and buttons.
Callout
Description
1
Non-maskable interrupt (NMI) button - Used by Oracle service personnel.
2
Reset button - Used by Oracle service personnel.
3
Locate button/indicator - Used to identify the server. For details, see the
Oracle
ILOM Documentation Library
at:
http://www.oracle.com/goto/ILOM/docs
4
Chassis Fault indicator - For details, refer to
Sun Server X4-8 Service Manual
5
Power/OK (Green indicator) - For details, see
.
6
SP OK (Green indicator) - Steady on if SP is operating, blinks while SP is
booting, off if SP has no power.
7
SP reset button - Used by Oracle service personnel.
8
SMOD fault indicator- Indicates a system module (SMOD) fault (Amber)
9
HBA fault indicator - Indicates a host bus adaptor (HBA) fault (Amber)
Note -
For details on system power and the related controls and indicators, see
Server Features and Components
21
Summary of Contents for SUN X4-8
