Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 152 / 356

Disable DISM

DISM Restrictions

Dynamic Intimate Shared Memory (DISM) is not supported for use on Oracle SuperCluster

T5-8 Solaris environments in instances other than the ASM instance. The use of DISM on the

system outside of the ASM instance can lead to several different issues ranging form excessive

swap usage (even when memory is available) to kernel panics to performance problems. It has

been determined that the ASM instance is typically such a small memory footprint that it should

not cause an issue.

This behavior typically occurs on instances created after installation, because Solaris 11 uses

Automatic Memory Management by default. To prevent this DISM issue when creating Oracle

Solaris 11 instances, disable DISM. For more information see:

“Disable DISM” on page 152

To decide if DISM is appropriate for your environment, and for more information about using

DISM with an Oracle database, refer to the Oracle white paper “

Dynamic SGA Tuning of Oracle

Database on Oracle Solaris with DISM

”:

http://www.oracle.com/technetwork/articles/systems-hardware-architecture/using-
dynamic-intimate-memory-sparc-168402.pdf

Disable DISM

Dynamic Intimate Shared Memory (DISM) is not supported for use on Oracle SuperCluster

T5-8 Oracle Solaris environments in instances other than the ASM instance. For more

information, see

“ DISM Restrictions” on page 152

Note -

Do not disable the use of automatic shared memory management (ASMM) within

the database, which is a very useful and desirable feature to reduce DBA management of the

database.

Disable the use of DISM by the database on Oracle Solaris in one of two

ways; either unsetting the SGA_MAX_SIZE / MEMORY_MAX_TARGET /

MEMORY_TARGET parameters, or ensure SGA_MAX_SIZE is set to the same

value as SGA_TARGET parameter or equal to the sum of all sga components in

the instance.

■

For example, to set a 64 G SGA:

152

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands