Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 215 / 356

Enable the HTTP Receiver on the ASR Manager

When you have completed these instructions for both SPARC T5-8 servers

in Oracle SuperCluster T5-8, approve and verify contacts to the SPARC T5-8

servers on MOS.

See

“Approve and Verify ASR Asset Activation” on page 219

for those instructions.

For more information on the process, see ASR MOS 5.3+ Activation Process (Doc ID

1329200.1).

Configuring ASR on the SPARC T5-8 Servers

(Oracle Solaris 11)

Note -

Do not attempt to copy and paste commands that span across multiple lines from this

section. Manually type commands that span across multiple lines to ensure the commands are

typed properly.

Oracle Solaris 11 includes the ability to send ASR fault events and telemetry to Oracle using

xml over HTTP to the ASR Manager.

To enable this capability use the

asr enable_http_receiver

command on the ASR Manager.

Select a port for the HTTP receiver that is appropriate for your network environment and does

not conflict with other network services.

Perform the following tasks:

■

“Enable the HTTP Receiver on the ASR Manager” on page 215

■

“Enable HTTPS on ASR Manager (Optional)” on page 216

■

“Register SPARC T5-8 Servers With Oracle Solaris 11 or Database Domains to ASR

Manager” on page 217

Enable the HTTP Receiver on the ASR Manager

Follow this procedure on the ASR Manager to enable the HTTP receiver for Oracle Solaris 11

ASR Assets.

Log in to the ASR Manager system as

root

Verify the existing settings:

asr show_http_receiver

Enable the HTTP receiver:

asr enable_http_receiver -p

port-number

Monitoring the System

215

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands