Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 220 / 356

Approve and Verify ASR Asset Activation

Note -

For each component in the system, you should see two host names associated with

each serial number. If you see only the Oracle ILOM host name, that means that you did not

activate ASR for that component. If you see more than two host names associated with each

serial number, you might need to request help for ASR. To do this, open a hardware SR with

“Problem Category” set to “My - Auto Service Request (ASR) Installation and Configuration

Issues.”

Click the asset's serial number.

If any missing information about the asset is required, the information pop-up will indicate

the needed information. The ASR Activation window will appear and look like the following

figure.

Note -

ASR Host name is updated when an activation request is sent to Oracle from the ASR

software on the asset. (For example, from the

asr activate_asset

command on the ASR

Manager.)

Required fields for ASR asset activation are:

■

Contact Name: You can only select a name associated with the support identifier. Click the

drop-down menu to see the list of available names.
A contact must have the "Create SR" privilege for the asset's support identifier.

■

Street Address 1: Type the street address for the asset.

220

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands