Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 59 / 356

Understanding the Software Configurations

Management Network Overview

The management network connects to your existing management network, and is used for

administrative work. Each SPARC T5-8 server provides access to the following management

networks:

■

Oracle Integrated Lights Out Manager (ILOM) management network – Connected through

the Oracle ILOM Ethernet interface on each SPARC T5-8 server. Connections to this

network are the same, regardless of the type of configuration that is set up on the SPARC

T5-8 server.

■

1-GbE host management network – Connected through the four 1-GbE host management

interfaces (NET0 - NET3) on each SPARC T5-8 server. Connections to this network will

vary, depending on the type of configuration that is set up on the system. In most cases, the

four 1-GbE host management ports at the rear of the SPARC T5-8 servers use IP network

multipathing (IPMP) to provide redundancy for the management network interfaces to the

logical domains. However, the ports that are grouped together, and whether IPMP is used,

varies depending on the type of configuration that is set up on the SPARC T5-8 server.

10-GbE Client Access Network Overview

This required 10-GbE network connects the SPARC T5-8 servers to your existing client

network and is used for client access to the servers. 10-GbE NICs installed in the PCIe slots are

used for connection to this network. The number of 10-GbE NICs and the PCIe slots that they

are installed in varies depending on the type of configuration that is set up on the SPARC T5-8

server.

InfiniBand Network Overview

The InfiniBand network connects the SPARC T5-8 servers, ZFS storage appliance, and Exadata

Storage Servers using the InfiniBand switches on the rack. This non-routable network is fully

contained in Oracle SuperCluster T5-8, and does not connect to your existing network.

When Oracle SuperCluster T5-8 is configured with the appropriate types of domains, the

InfiniBand network is partitioned to define the data paths between the SPARC T5-8 servers, and

between the SPARC T5-8 servers and the storage appliances.

The defined InfiniBand data path coming out of the SPARC T5-8 servers varies, depending on

the type of domain created on each SPARC T5-8 server:

■

“InfiniBand Network Data Paths for a Database Domain” on page 60

Understanding the System

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands