Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 65 / 356

Understanding the Software Configurations

So, for a Large Domain in a Half Rack, these connections would be through P0 on the

InfiniBand HCA installed in slot 11 (active) and P1 on the InfiniBand HCA installed in

slot 8 (standby).

Understanding Medium Domains (Half Rack)

These topics provide information on the Medium Domain configuration for the Half Rack:

■

“Percentage of CPU and Memory Resource Allocation” on page 65

■

“Management Network” on page 65

■

“10-GbE Client Access Network” on page 66

■

“InfiniBand Network” on page 66

Percentage of CPU and Memory Resource Allocation

The amount of CPU and memory resources that you allocate to the logical domain varies,

depending on the size of the other domains that are also on the SPARC T5-8 server:

■

Config H2-1 (Two Medium Domains): The following options are available for CPU and

memory resource allocation:

■

Two sockets for each Medium Domain

■

One socket for the first Medium Domain, three sockets for the second Medium Domain

■

Three sockets for the first Medium Domain, one socket for the second Medium Domain

■

Four cores for the first Medium Domain, the remaining cores for the second Medium

Domain (first Medium Domain must be either a Database Domain or an Application

Domain running Oracle Solaris 11 in this case)

■

Config H3-1 (One Medium Domain and two Small Domains): The following options are

available for CPU and memory resource allocation:

■

Two sockets for the Medium Domain, one socket apiece for the two Small Domains

■

One socket for the Medium Domain, two sockets for the first Small Domain, one socket

for the second Small Domain

■

One socket for the Medium Domain and the first Small Domain, two sockets for the

second Small Domain

Management Network

Two 1-GbE host management ports are part of one IPMP group for each Medium Domain.

Following are the 1-GbE host management ports associated with each Medium Domain,

depending on how many domains are on the SPARC T5-8 server in the Half Rack:

Understanding the System

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands