27
Trouble Shooting
Problem
Possible reason
Remedy
TOOTHBRUSH
Oral-B handle does not
operate with SmartGuide
1. Synchronizing with
SmartGuide failed
2. Radio transmission is
deactivated; radio trans-
mission display (f) is
turned off.
3. Handle has no radio
transmission installed
1. Synchronize your toothbrush(es) (again).
Follow steps under «Synchronizing your
toothbrush»
2. Activate the radio transmission by
simultaneously pressing the on/off (c) and
mode button (d) for 3 seconds until the
radio transmission display (f) turns on
3. Oral-B handle with radio transmission
installed can operate with SmartGuide only
1. Short stuttering
sounds/flashing green
light every 30 seconds
(45 seconds in Deep
Clean mode)
2. Stuttering sound/
flashing green light
only after 2 minutes
(3 minutes in Deep
Clean mode)
1. «Professional timer»
activated
2. «2-Minute timer»
activated
1. Set your timer to 2-Minute timer; follow
steps under «Personalizing the timer»
2. Set your timer to Professional timer
(stuttering sounds/flashing green light
every 30 seconds); follow steps under
«Personalizing the timer»
Gums bleed slightly
1. May happen in first days
of usage
2. Brush head
3. Brushing mode
1. Bleeding should stop after a few days.
Should it persist after 2 weeks, please
consult your dentist or dental hygienist.
2. Try using the Oral-B «Sensitive» brush
head
3. Try using the «Sensitive» mode
BRUSH HEADS
Oral-B brush head does
not fit Oral-B handle
Oral-B brush head not
compatible with your handle
Oral-B brush heads that fit your Oral-B handle
do not fit «Pulsonic», «VitalitySonic», «Sonic
Complete», «CrossAction Power»
APP
Toothbrush does not
operate (properly) with
Oral-B app
1. Oral-B app is turned off
2.
Bluetooth
is not activated
on your smart phone
3. Radio transmission is
deactivated; radio
transmission display (f) is
turned off
4. Connection to
Bluetooth
has been lost
5. Your smart phone does
not support
Bluetooth
4.0
(or higher)
1. Turn on Oral-B app
2. Activate
Bluetooth
on your smart phone;
described in its user manual
3. Activate the radio transmission by
simultaneously pressing the on/off (c) and
mode button (d) for 3 seconds until the
radio transmission display (f) turns on
4. Briefly press the mode button (d) to
re-connect.
Keep your smart phone in close proximity
when using it with the toothbrush handle
5. Your smart phone must support
Bluetooth
4.0 (or higher) in order to connect to your
toothbrush handle
Reset to factory settings
Original functionality wanted
Press and hold on/off button (c) for
10 seconds until all indicator lights double
blink simultaneously.
97469867_D36_LA_S6-28.indd 27
97469867_D36_LA_S6-28.indd 27
12.10.15 13:15
12.10.15 13:15
CSS APPROVED Effective Date 5Nov2015 GMT - Printed 05Apr2016 Page 26 of 27
