PANEL FUNCTIONS
SPECIFICATIONS
FRONT PANEL
REAR PANEL
FUNCTION DESCRIPTIONS
1- INPUT : Use this jack to connect your guitar to the amplifier by means of a shielded instrument cable.
2- GAIN : This controls pre-gain level.
6- VOLUME : Controls the overall volume of the amplifier.
3- HIGH : Provides high frequency equalization as required.
4- MID : Provides middle frequency equalization with cut and boost.
5- LOW : Provides low frequency equalization as required.
7- AUX IN : Use this 1/8" stereo mini jack to connect the output of a CD or,MP3 player,Laptop,etc.,to the amp.(The jacks are internally summed to a mono signal).
9- HEADPHONE : For use with most stereo headphones.
10- POWER INDICATOR : LED indicates whether the power switch is ON or OFF.
9
7
10
6
5
4
3
2
1
11
12
OUTPUT POWER
SPEAKER
INPUT
INPUT SENSITIVITY
NOISE
HEADPHONE
JACK LEVEL
POWER
CONSUMPTION
POWER
REQUIREMENT
DIMENSIONS
(W)X(H)X(D)
WEIGHT
CABINET
COLOR & FINISH
25 Watts RMS
@ 1% THD, 4 ohm
300mV @ 25W
(Headphone Impe. 8 ohm)
100V,120V,230V-
240V, 50/60Hz
12.4x13.5x9.0 inch
315x345x230 mm
Sturdy
Particleboard
Orange
Leatherette
Normal 48mV F=1KHz,
Volumes Tone Controls at Max
-25dB(Vol Max/M.Vol Max)
-55dB(Vol Max/M.Vol Min)
-30dB(Vol Max/M.Vol Min/Rev.Max)
1X 8"
Guitar and AUX
65VA
19.8 lbs.(9kg)
CAUTION:
To avoid possible damage to your hearing, do not use headphones for extended periods of time at extremely loud levels.
11- AC MAIN POWER SWITCH : This switch turns the AC Main Power ON or OFF.
12- AC INLET & FUSEHOLDER : Connect the supplied standard 3-pin 'IEC' plug here.
8
8- LINE OUTPUT : Use this unbalanced jack to send a line level signal to another amplifier, for the mixung board, or recording consol.
