SPEAKER OUTPUTS
THE ROCKER 15 MUST BE CONNECTED TO A
SPEAKER LOAD (Ω) AT ALL TIMES DURING
OPERATION.
NEVER PLUG ANYTHING OTHER THAN A SPEAKER
CABLE INTO THE SPEAKER OUTPUT. ONLY
CONNECT SPEAKER CABINETS AS SHOWN.
NEVER USE AN INSTRUMENT CABLE TO
CONNECT SPEAKERS. ONLY USE UNSHIELDED
TWO CONDUCTOR SPEAKER CABLE.
NEVER CONNECT X 2 CABINETS OF
DIFFERENT IMPEDANCES (Ω).
ENSURE THE SPEAKER CABINET’S POWER
HANDLING RATING (WATTS RMS) IS SUITABLE FOR
YOUR AMPLIFIER. IF YOU ARE UNSURE, CONTACT
YOUR ORANGE DEALER.
MONO
PEDAL
ROCKER 15 REAR CONNECTIONS
2 x 16
Ω
CABINETS
EXTENSION CABINET
The
HEADROOM/BEDROOM
attenuator
switch works with the
FULL/STBY/HALF
switch on the top panel to vary the output power:
HEADROOM (FULL) = 15 Watts
HEADROOM (HALF) = 7 Watts
BEDROOM (FULL) = 1 Watt
BEDROOM (HALF) = 0.5 Watt
INTERNAL
SPEAKER
( 16
Ω
)
RECONNECT INTERNAL
SPEAKER AS SHOWN
EXTENSION SPEAKER
( 16
Ω
ONLY)
2 x EXTERNAL
SPEAKERS
( 16
Ω
ONLY )
DISCONNECT
INTERNAL
SPEAKER
1 x 8
Ω
CABINET
1 x EXTERNAL SPEAKER ( 8
Ω
ONLY )
DISCONNECT
INTERNAL
SPEAKER
1 x 16
Ω
CABINET
REPLACE INTERNAL SPEAKER WITH
1 x EXTERNAL SPEAKER ( 16
Ω
ONLY)
DISCONNECT
INTERNAL
SPEAKER
IN
OUT
6
7
