Features:
• Capable of stabilizing flight on just about any fixed wing aircraft (including V-‐tail/Delta models)
• Spektrum/JR DSM2 compatible 6Ch 2.4GHz Receiver
• Remote ON/OFF feature that can be controlled via your transmitter's AUX channel
• Supports 3D flight without undermining stability
• Independent gyro gain adjustment for aileron, elevator and rudder
• Easy-‐to-‐access gyro reversing switches on front of unit
• Compact and light weight design
Specs:
Size:
53x34x14mm
Weight:
15g
IC:
Atmega168PA
Gyro:
3-‐Axis MEMS
Receiver:
Spektrum/JR DSM2 Compatible 6Ch 2.4GHz
Input Voltage:
4.8-‐6.0V
Signal from Receiver:
1520us
Signal to Servo:
1520us
Installation
IMPORTANT!! Be sure to use proper double-‐sided adhesive tape for installation to minimize vibration of
the unit. Firmly fix the unit in the center of fuselage as close as possible to the CG point. Also be sure to
mount the unit in the correct orientation (Antenna 2 pointing forward, pin sockets rearward). Incorrect or
careless installation might harm the performance or even result in a crash.
Binding
Insert the bind plug in BIND/BATT port. Then power on unit, LED1 flashes, indicating that unit is in bind
mode and ready for binding to your transmitter. Check your TX manual for binding instruction.
