9
EN
Check/Commissioning
• We recommend performing both initial and subsequent regular machine
inspections. Before installation and first commissioning, check that the
device is complete and shows no visible signs of damage.
• Do not use the appliance if it is incomplete, damaged, or damaged
during transportation or use. In this case, have the machine repaired by a
specialized service center.
• Do not attempt to interfere with the construction or adjustment of the
component parts in any way.
• Clean the machine before commissioning as described in the
„Commissioning“/ “Before first use” section.
• Never clean the device (the body with the electrical parts and the control
panel) and the power cord with the plug in a way that could cause the liquid
to flow into the device. Clean these parts with a damp cloth and wipe dry or
let it dry.
There is a risk of serious injury!
Location/Installation
• The device is intended for use as a stand-alone. Do not attach the
appliance to the building parts of the living spaces - walls, ceilings, etc.
• Only use the device in a working (vertical) position on a flat surface where
there is no risk of overturning it.
• Do not place the appliance in front of an open window or door, as the
optimal function and efficiency will be compromised.
• The appliance must be installed in accordance with national and local
safety regulations applicable to the connection of electrical equipment
with protective earthing. To ensure additional protection against the risk of
electric shock, it is recommended to install it to the power supply circuit of
the device, a current protector (RCD) with a rated trip current not exceeding
30mA.
• If you have any questions about the electrical installation, ask for advice
from a qualified electrician.
• Do not place or operate the appliance where it is likely to overturn it.
• Do not place the appliance:
- to unstable tables or parts of furniture,
- on an uneven and dirty surface,
- near containers with water or other liquids.
• Place the appliance only on flat, stable and stable flooring - floors and
floorings that have a stable and solid structure (eg. wood, ceramic tiles,
etc.). Do not place the appliance on floorings that have an unstable
structure such as: carpets or other decorative flooring with long fibers.
• Do not place or use the appliance on „soft“ surfaces, bed mattresses,
upholstered sofas and chairs, and so on.
• Always make sure that the place you want to place the device has enough
space, mechanical strength and stability.
There is a risk of damage to the equipment or other property damage!
•
Do not place or use equipment near water containers, including the pool. If
the appliance falls into the water, do not remove it. First, pull the power cord
plug out of the mains socket and then select the appliance from the water.
In such cases, take the device for inspection to a specialist service to check
that it is safe and working properly.
