31
EN
2 Continuous continuous discharge
1
Unscrew the drain plug and pull out the plug (see figure 13)..
2
Insert a suitable drain PVC hose with an outer diameter of 13 mm (see
figure 14) into the water drain approximately 8 to 10 mm.
3
Connect the drain hose to the toilet or external drain.
Note:
1. The drain hose must be installed while there is no water in the drain pan.
2. When running in cooling mode, to ensure water for the unit condenser
and to increase the cooling effect of the unit, we recommend not using
continuous continuous discharge.
3. Place the end of the drain hose at a suitable water outlet, unavailable for
children, other persons and animals, and below the level of the water tank
in the unit. Do not bend the hose.
4. If you are using the Continuous Discharge System, put the drain plug
and the stopper off.
fig. 13
fig. 14
plug
drain
seal
drain
drain
hose
