10
EN
Case 2: If the total weight of the weighed food is
greater than 4% of the maximum weight
(more than 200 g for a 5,000 g model)
After the first weighing, press the “Z/T” button. “0g”
appears on the display. “TARE” in the upper left corner
of the display indicates that the “TARE” function is active.
The maximum load capacity is reduced by the total
weight of the food to be weighed.
In this case, pressing “Z/T” again shows “0g” on the
display and pressing “Z/T” again shows the total weight of all foods.
Timer function (timer)
1. Press the T-SET button to activate the timer function. The character is
displayed. Use the
$
(Z/T) and
4
(UNIT) buttons to set the first digit.
Press T-SET again to set the second to fourth digits.
2. After setting the time span, press the T-SET button to start the countdown.
3. Press the T-SET button to change the timer setting. The time range is
cleared and then set a new time.
4. When the timer counts down to “00:00”, the alarm will sound
“Beep” 60 times. Press the T-SET button to turn off the beep. The balance
switches off automatically after approx. 120 seconds.
6. The maximum time that can be set is 99:59 (99 minutes, 59 seconds).
Current temperature function
1. The current temperature is displayed in the upper right corner of the display.
2. Temperature range: 0 +40 ° C (± 0.5 ° C tolerance)
press ON/OFF
press T-SET
press
$4
for time setting
