15
EN
Assembly of accessories and
mounting on the motor unit
Follow the steps below to assemble the appliance for food processing.
1.
Place the base on a dry, level and firm surface. Do not plug in the
power cord before assembling the device completely!
2.
Remove the container and place the food to be mixed in the container.
Always insert only 1 cup (measuring cup) of food at a time. Before
processing, cut larger pieces of food into approx. 2.5 cm cubes. If
necessary, add an adequate amount of water.
Do not process more than 1 cup (approx. Half of the used
container) of food at a time!
Container Suitable for
Max. filling capacity
3.
Place the knives firmly on the filled container by turning them.
Carefully point the blades inside the container to avoid injury.
Caution!
Before using the appliance, always make sure that the knives are firmly
screwed on so that the container is sealed.
The knives are very sharp. Always handle them carefully.
Do not touch the blades with your hands, as this may cause injury.
4.
Plug the power cord into an electrical socket.
5.
Place the assembled knife mixing bowl assembly on the motor base by
placing it with the knives on top of the base so that the protrusions on
the container fit into the holes in the motor base, and press it against
the base and turn it to the right.
6.
Switch on the blender by pressing and holding button 5. To stop mixing,
stop pressing button 5. The appliance switches off. To mix in pulse
mode, turn the power button 5 on and off cyclically.
mixing smoothies, juices,
baby food or any creamy
dishes
container
with mixing
knives
570 ml
