background image

•  Do not place objects on the device, do not allow foreign bodies to 

enter the holes. Do not use the device near freely moving textiles - 

curtains, curtains, etc. Air movement due to the operation of the device 

may cause the fabric to be pulled into the space of the rotating parts.

•  Ensure that no environmental dirt, such as dust, clumps of dust, fibers, 

and the like.

•  Take care during the use and operation of the appliance to avoid 

getting in touch with the rotating parts with your fingers, hair, loose-

fitting chains or loose clothing.

  There is danger of trapping!

•  The device contains sharp-edged rotating parts. Never place your 

fingers in the space with these parts and do not bend any other 

objects.

•  Always wait for the rotating parts to stop completely before handling 

the device.

  There is a risk of serious injury!

•  Never overload the equipment beyond the limits specified by the 

technical specifications!

•  If you experience any unusual symptoms (smell, sound ...) while using 

the device, turn it off immediately and unplug it from the mains. Have 

the appliance checked by a specialist workshop.

•  Do not expose yourself or other people to long-term exposure to 

strong draft air from the device. It can have a negative impact on your 

health as well as on other people‘s health.

•  If any safety component / component (mechanical, electrical / 

electronic) is part of the device, never disable this part / component! If 

the safety component / component is damaged or not working, do not 

use the appliance!

•  Never underestimate the potential hazards and take extreme caution 

!!!

10

EN

Summary of Contents for SF-19















Reviews: