15
EN
• With this steamer, it is not possible to iron very strong and stubborn folds or
achieve a sharp, ironed appearance. In this case, we recommend using a
conventional iron.
• During steam ironing, the fabric absorbs moisture. Allow the clothes to dry
completely before storing, e.g. in the closet.
• The filling opening of the water tank must not be opened during operation.
If the water tank is emptied
Fill the tank again.
• Use clean tap water without any additives (no vinegar, starch, perfumes or
emollients).
• If the tap water is medium or hard, mix it with distilled water.
1
Pull the tank straight out (as described above).
2
Open the filler cap.
3
Hold the water tank under the water tap, fill it and close the cap.
4
Put the water tank back in the appliance. The water tank must audibly click into
place.
Using a strong steam current
1
Plug the machine into an electrical outlet and turn on the machine. The
indicator light will flash and will illuminate permanently when the operating
temperature is reached (in approx. 10 seconds).
2
While holding down the short steam button, gently move the appliance along
the garment.
3
If water leaks from the steam nozzles, release the steam button to bring the
appliance back to operating temperature.
Notes
• The steam flow function can be used with or without the supplied brush.
• You may smell an odor when you first use it. This is a consequence of the
manufacturing process and is not a malfunction of the equipment. Ensure
adequate ventilation
