OPTICODEC
E
65
The menu item 'Incoming Calls' defines the behavior of the
OPTICODEC during operation on a S
0
connection together
with other units.
First set 'Accept Telephone Calls' to:
ALWAYS every telephone call is accepted
NEVER
all telephone calls are rejected
ASK
manual confirmation of each call is requested
by the unit.
With the menu item 'Accept MPEG/G.722 Calls' the behavior
for incoming MPEG/G.722 calls is determined. The setting
options are described above.
The 'Test Called Number‘ menu option activates the MSN
query for incoming calls. This requires the correct MSNs
of the individual connection to be entered into the ‘Local
Numbers’ menu item. The call is only accepted if the two
numbers are identical. On Euro-ISDN, the MSN is usually
the ISDN number of the connection without the dialling
code, but for PBXs it is usually the extension number only.
The ‘YES’ option should only be activated if, in addition
to the OPTICODEC, other devices (e.g. a telephone, fax
machine, PC card) must also be operated on the same
ISDN connection.
These settings concern incoming calls for OC. This setting
is required only for those ISDN systems that do not
automatically add the ISDN number. The minimum number
length applies here too. For direct S0 connections with
Euro-ISDN, the leading zeros in the ISDN numbers are not
transferred for incoming calls, e.g. 7141226622. This can be
corrected by means of the following entries.
If a 0 is entered for national calls, this is added here.
The same applies for international calls, where 00 is to
be entered in Germany. When these digits are entered,
the ISDN number required to make the call will actually
be displayed.
Incoming Calls
Accept
Telephone Calls
Accept
MPEG/G.722 Calls
Test Called Number
Number Prefix
(for incoming calls)
OPTICODEC 7400
System Setup
Summary of Contents for opticodec 7200
