CU 4100
7
USE
1.
Use the foil cutter to remove any protection of the cork.
2.
Place the corkscrew on the top of the wine bottle. Ensure that it remains as upright as possible at
all the times .If you hold the corkscrew at an angle to the bottle, it will not remove the cork properly.
3.
Hold the corkscrew firmly with one hand while the other one holds the bottle, and depress the
lower part of the switch. The corkscrew spiral will turn in a clockwise direction and enter the cork,
then gradually remove it from the bottle. When the corkscrew mechanism stops, the cork has been
fully removed from the bottle.
4.
Lift the wine opener away from the bottle. To remove the cork, simply depress the upper part of
the switch. The spiral will turn in an anti-clockwise direction and release the cork.
BATTERY
The appliance works with 6 x 1.5V AAA (not included)
To replace the batteries, unscrew the top cover and insert them in accordance with the polarity
CLEANING
•
Never immerse the appliance in water or other liquid.
•
Clean the outside of the appliance with a damp cloth and dry it with a soft, clean cloth. Never use
abrasives.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separately
collected. Consumers should contact their local authority or retailer for information concerning
the correct disposal of their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low
Voltage Directive 2006/95/EC and the requirements of the EMC directive 2004/108/EC.
