PWS 0547
17
WALL FAN
Connect the support bars and screw firmly.
If the plastic protectors are not assembled, install them with the screws
in the support bars’ holes.
Install the hook in the wall.
Please note that the fan should be looking at the room, as shown in
the pictures.
Put the engine between the support bars.
Before putting the screw into the holes, note that you should install two round metallic pieces (pictures below)
to avoid the fan’s head falling down.
La parte recta de la pieza de metal debe ponerse hacia el frente del ventilador.
The straight part of the metallic piece should face the front part of the fan.
The round metallic pieces have some protrusions to avoid the fan falling down.
