CP 100138
15
1.
Minimum space for installation (Fig 1)
Choose a location for mounting the fan where the blades are clear from all obstructions and maintain a
minimum of 2.3 meters from the floor, 0.6 meter away from the wall.
Fig 1
2.
Bracket installation
(1)
For wooden ceiling, fix the bracket on the beam using 1.5 inches wooden threaded screws. (Fig 2)
(2)
For cement ceiling, first use
φ
8mm impact drilling bit to drill two holes to fit the expansion screws,
then secure the bracket on the ceiling by tightening M6 expansion screws. (Fig 3)
Fig 2 Fig 3
Note: After the bracket is secured, make sure the selected ceiling location with the fixings is capable of
bearing a minimum weight/gravity of 50 kg to ensure safety.
Note: Please select the appropriate type of screws to fix the bracket. Do not fix the bracket directly on
plywood to avoid screw loosening that causes danger.
3.
Downrod installation
(1)
Put the downrod through the upper canopy and the lower canopy as shown in Fig 4. (Fig 4)
(2)
Put the wires through the downrod. Then insert the downrod into the motor flange and match with
the holes. Put the pin through the holes and fix the pin using the R clip. (Fig 5)
(3)
Tighten the screw to secure the downrod. (Fig 6)
