BP 1217
12
CLEANING
-
Before cleaning the reflector, disconnect the power cord from the socket.
-
Wait for a while to cool off. Clean your appliance with a damp cloth and wipe it dry.
OPERATION AND USAGE
-
Put the plug into socket which must be earthed.
-
The desired heat setting is obtained by operating the provided power knob.
-
Your heater will only operate in the upright standing position as the appliance is fitted with
a safety cut-out switch which switches it off should the unit be knocked over.
-
Selecting
O
, the unit is off. Choose any of the other two positions in order to turn the unit
on.
a.
Select and the maximum power will be 600W
b.
Select
and the maximum power will be 1800W + motor.
Once the power has been selected, you can adjust it with the help of the thermostat.
HUMIDIFIER OPERATION
1.
Always ensure the unit is unplugged before filling/refilling.
2.
Fill tank with clean water (do not fill above “max” mark).
3.
Any unused water can be left in the unit for the next use or can be poured out by turning
the unit upside down, (because of the size of the unit, this is very cumbersome so it is
recommended to leave any remaining water in the unit). If you want to empty the water
before long term storage, always ensure that the unit is unplugged and has cooled down
completely taking great care when turning the unit upside down.
4.
Ensure that any drips of water that may come into contact with the heater body are dried
off completely before next use.
IN CASE OF MALFUNCTION
If you have any problem, please contact with an authorized service. Do not try to repair it by
yourself and do not let non-authorized people. The problems occurred due to the non-authorized
and improper usage is not under taken by guarantee. Our company is not responsible for these
problems. In these situations, guarantee is not valid although the guarantee duration is not ended.
TECHNICAL SPECIFICATIONS
VOLTAGE
230 V (~)
POWER
1800 W
FREQUENCY
50 Hz
CLASS
I
