DA 5650
7
14.
WARNING: In case of misuse, there is a risk of possible
injury.
•
Do not immerse the motor unit in water nor rinse it under
the tap.
•
Always place the appliance on a flat, stable surface.
•
Before using your water dispenser, please flush the inside
water system with fresh water to avoid any taste.
•
The suitable surrounding temperature is 10ºC to 38ºC.
Please do not use the water dispenser when the ambient
temperature is below 10ºC, otherwise ice-jam may be
happened.
1. DESCRIPTION
1.
Status LED.
2.
Water level.
3.
Water tap.
4.
Filter lifetime indicator.
5.
Lid.
6.
Upper water tank (4L).
7.
Carbon filter.
8.
Bottom water tank (4L).
9.
Back housing.
10.
ON/OFF switch.
11.
Power cord.
12.
Cold water tank (0.7L) (inside).
2. BEFORE FIRST USE
To avoid water has plastic taste is necessary to clean the appliance before regular use. For that follow the
next instructions:
-
Remove the lid (5) and remove upper water tank (6).
-
Fill ¾ of bottom water tank (8) with water and add ½ tbsp of bleach. Do not use a more concentrated
ratio!
-
Let the solution stand for 5 to 7 minutes.
-
Drain the disinfectant solution by pressing the tap (3) and emptying the water from the tank. Remove the
cap located on the base to finish emptying the inner tank. (Do not forget to put this cap back).
-
Fill the tank up to ¾ with mineral water and empty the tank again, redo this operation.
-
If after this process there is still a slight taste of bleach in the water, you can add a soda pill to the water,
let stand for 5 minutes and empty the tank again.
-
Do not use the water dispenser with any liquid other than water.
-
ATTENTION: it is recommended to carry out this process from time to time and also in the case that the
dispenser has been unused for a long period of time.
