HU 2028
20
CARE AND MAINTENANCE
−
Switch the appliance off and unplug it.
−
Wipe the body of the appliance off with a soft damp cloth. If
necessary use a little washing-up liquid.
−
Rinse the water tank with clean water after each use. To dry for
storage, wipe with a soft clean cloth.
−
Do not use detergents to clean any part of the unit that normally
contains water. Detergents can interfere with the performance of the
unit.
−
Do not immerse the humidifier in water or any other liquid.
−
Do not use harsh or abrasive cleaning agents or solvents.
Cleaning the water tank
−
Remove the nozzle and water tank
−
Remove the filter cap.
−
Clean the tank with a diluted vinegar solution.
−
Rinse extremely well, taking care not to leave any cleaning residue
in the tank.
−
Dry thoroughly.
−
Store in original packaging if not used for extended period of time.
CHECK THE MALFUNCTION AND REPAIR
If your humidifier can’t work, please ask the service department to
repair:
MALFUNCTION
CAUSATION
RESOLVE METHODS
1. Power indicator
can’t work and with no
wind and mist
Didn’t connect the
power supply
Connect the humidifier
from the power supply
Didn’t turn on the
humidifier
Switch on the unit
2.Power indicator
illuminate, the unit
with wind but no mist
No water in the water
tank
Fill water in water
tank
Mist adjusting is too
low
Increase the adjustment
Floater don’t float
enough
Fill water in water
tank
3.Smelly mist
New humidifier
Open water tank, put it
in shadow for 12 hours.
Dirty water or long-
time to store water in
water tank
Clean the water tank,
fill clean water in.
4.Power indicator
illuminate, the unit
with no wind and mist
Too much water in the
base flume
Empty the flume, and
then close the cap of
water tank.
5.Little mist comes out
of the nozzle
Dirty ultrasonic
transducer
Clean the transducer
Dirty water or long-
time to store water in
water tank
Clean the water tank,
fill clean water in.
6.Abnormal noise
Caused by little water
in water tank.
Fill water in water
tank.
