PHE 85
13
returned to hose’s place of purchase. If leak is at
Regulator/Cylinder
Valve
connection:
disconnect,
reconnect, and perform another leak check. If you continue
to see bubbles after several attempts, cylinder valve is
defective and should be returned to cylinder’s place of
purchase.
Turn off the gas valve immediately if smell of gas is
detected. Turn Cylinder Valve OFF.If leak is at Hose/
Do not transport heater while it’s operating.
Do not move the heater after it has been turned off until
the temperature has cooled down.
Keep the ventilation opening of the cylinder enclosure free
and clear of debris.
Do not paint the radiant screen, control panel or top
canopy reflector.
Control compartment, burner and circulation air
passageways of the heater must be kept clean.
Frequent cleaning may be required as necessary.
The LP tank should be turned off when the heater is not in
use.
Check the heater immediately if any of the following
occurs:
- The heater does not reach temperature.
- The burner makes popping noise during use (a slight
noise is normal when the burner is extinguished).
