PWS 2046
15
TILT ADJUSTEMENT
To change the tilting angle of the fan head, loosen the thumb bolts, move
the fan head to the desired angle, and then re-tighten the thumb bolts.
Illustration
A) Speed control knob
B) Blade
C) Grill
D) Outer Pipe
E) Bar
FAN STORAGE
Your fan can be stored in the off-season either partially disassembled, we
recommend using the original (or appropriately sized) box.
If stored assembled or partially assembled, remember to protect the fan
head form dust.
CLEANING AND MAINTENANCE
•
Always unplug the fan before cleaning or disassembling.
•
Use a damp cloth to clean the dust from the fan.
•
Do not allow water to drip on or into the fan motor housing.
•
Do not use any of the following as a cleaner: gasoline, thinner, or
benzine.
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste
stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain,
and reduce the impact on human health and the environment.
The crossed out “wheeled bin” symbol on the product reminds you of
your obligation, that when you dispose of the appliance, it must be
separately collected.
Consumers should contact their local authority or retailer for
information concerning the correct disposal of their old appliance.
