SET 5600
9
5.
Speed /-.
6.
Speed indicator lights.
7.
Ignition switch (3 positions: off, left turn
and right turn).
8.
Connection of the adapter.
9.
Flat sapphire cone.
10.
Sapphire cone.
11.
Small filing sapphire cutter.
12.
Cylindrical small sapphire cutter.
13.
Felt cone.
14.
Fine sapphire disc.
15.
Thick sapphire disc.
TECHNICAL DATA
Model: SET 5600
Voltage: 100-240V
Frecuence: 50/60Hz
Output voltage: 30V DC250mA
5 speeds with indicator lights.
INDICATIONS ON THE APPLIANCE
This manicure and pedicure set is provided with high quality accessories. This is supplied with 7 accessories
provided with a sapphire coating (except felt cone). Thanks to its different speeds and adjustable rotation to
the right or left, this device allows a professional pedicure and manicure.
In order to always offer sufficient power for an effective manicure and pedicure treatment, this apparatus is
provided with a fixed source of power by the electric power network.
UTILIZATION
-
Make sure that the appliance switch is in 0 position before connecting it.
-
Connect the adapter to the appliance, then connect the adapter to the plug.
-
Choose the accessory which you want, depending that you desire.
-
Put the accessory on the upper support and push firmly.
-
Turn on the device by moving the ignition switch from position 0 (off) to position R (clockwise rotation)
or L (rotation to the left).
-
The speed of rotation can be changed with the speed button by pressing “-“ to lower it and “+” to raise
it.
-
To remove accessory, simply pull it out. Do not remove the accessory while the appliance is operating.
-
All filing and polishing accessories are coated with a sapphire grain. This granulation guarantees a long
useful life since its wear is almost nil.
-
It is recommend not to exert excessive pressure and always approach the accessories with extreme care
to the surface to be treated. The device must be passed over the parts to be treated with slight pressure
and circular movements.
-
It should be noted that the effect of the polishing of the accessories will be less if the skin is soaked or
damp. Therefore, avoid using this appliance after bathing.
-
Do not completely eliminate the cornea of the foot in order to preserve the natural protection of the
skin.
-
Be aware that the shaft can rotate freely at all times. The shaft must not be blocked for a long time as
otherwise the device will overheat and could be damaged.
-
After each treatment it is recommended that a moisturizing cream be applied on the treated parts.
