ST 07160 D BL/ST 07260 D BL/IN
13
Changing a light pic 10
-
Before changing the lights, make sure the appliance is switched off and unplugged.
-
Press the aluminum filter handle to the rear of the hood to the front desancle and remove it by pulling
down.
-
Replace LED light using only 2.5W.
-
Place the aluminum filter in its original position.
(7).ELECTRICAL DIAGRAM.
ST 07160 D BL
ST 07260 D BL/IN
(8). MAIN PARAMETERS
ST 07160 D BL
ST 07260 D BL/IN
Rated Input
220V-240V, 50Hz
Rated Power
82.5W
Lighting Power 2.5W X 2
Motor Power
80W
Drive Mode
Single Motor
Speed
Speed I Speed II
Speed III
Air pressure
≥
166
Pa
Noise
<66dB(A)
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE), requires
that old household electrical appliances must not be disposed of in the normal unsorted municipal
waste stream. Old appliances must be collected separately in order to optimize the recovery and
recycling of the materials they contain, and reduce the impact on human health and the
environment.
The crossed out “wheeled bin” symbol on the product reminds you of your obligation, that when you dispose
of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY: This device complies with the requirements of the Low Voltage Directive
2014/35/EU and the requirements of the EMC directive 2014/30/EU.
Rated Input
220V-240V, 50Hz
Rated Power
162.5W
Lighting Power
2.5W X 2
Motor Power
80W X 2
Drive Mode
Two Motors
Speed
Speed I Speed II
Speed III
Noise
<70Db(A)