SVT 1000
11
a maximum of 230ml
USE OF THE IRON
• After filling with water, plug in the iron, the ON / OFF button will light up in red (standby position)
• Press the ON / OFF button (9) 1 or 2 times to choose the steam output speed (1: light speed pink color, 2:
strong speed blue color) the iron will start to heat up and in less than 1 minute it will be ready for your use.
• Press the button (2) to release steam. To activate the continuous steam outlet, change the position of the
lock switch, which is on the button.
USE OF THE BRUSH
Attach the brush attachment to the front of the iron using the hooks. Now you can start using it
STORAGE
After using, pull out the plug, pour out the remaining water, turn the steam control to minimum, turn the
temperature control to “min”, let the iron cool down, put the iron on the safe and dry place vertically.
CLEANING
Before cleaning the iron, make sure that the appliance's plug is not connected to the power outlet.
Any lime scale or residue on the plate can be removed with a damp cloth or a non-abrasive liquid
detergent.
Avoid scratching the plastic plate with a metal object.
MAIN TECHNICAL PARAMETERS
Appliance
Voltage
Frequency
Power
SVT 1000
230 V (~)
50Hz
1630 W
Disposal of old electrical appliances.
The European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimize the recovery and recycling of the materials they contain, and reduce the impact on
human health and the environment. The crossed out “wheeled bin” symbol on the product
reminds you of your obligation, that when you dispose of the appliance, it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the correct disposal of
their old appliance.
DECLARATION OF CONFORMITY:
This device complies with the requirements of the Low Voltage Directive 2014/35/EU and the
requirements of the EMC directive 2014/30/EU.
