IOM MANUAL
SA ALUMINUM STOP LOG
www.orbinox.com
EDITION 12/2017
IOM-SA
3.
HANDLING AND STORAGE
Handling
Standard safety procedures shall be followed to prevent personal injury or equipment damage.
The equipment shall be lifted from the main frame. For bigger gates, the frame comes with hoist rings specially
arranged for handling purposes.
Never lift the gates in the inverted position or from the log.
Storage
Check the equipment on delivery and report back to Orbinox any missing components within 3 days from receipt
of the equipment. Orbinox will not accept responsibility for loss or damage to any equipment which has occurred
after this period.
Some gates might be packed with wooden strips (or tensioning steel beams) between both frame guides. Do not
remove the strips/beams before the gate has been properly installed in order to avoid any damage or distortion to
the frame.
Equipment shall be stored in a dry, clean and even area on a raised even wood surface to prevent distortion of
the frame. Do not stack Stop Logs.
