2
function will be counting up from zero directly if the training is going. Press “MODE” button for
confirmation and skip to next set-up.
4.
In SCAN mode shown as “Drawing C”. TIME/DISTANCE/CALORIES/PULSE/(RPM/SPEED)
will skip to display in every 6 seconds. The order is as follows.
Drawing C
5.
You can also press “MODE” button to select single function display except RPM & SPEED function.
The RPM & SPEED function will switch display.
Note:
1.
Stop training for 4 minutes, the main screen will be off and display the room temperature and the
calendar automatically as the following.
Temperature
Time / (Month. Day) / Year
You may press any button to have the computer restart working, the original value will retain.
(If re-install batteries, the original value will remove.)
2. If the computer displays abnormally, please re-install battery and try again.
3. Battery Spec: 3V CR2032 (1PC). Battery replacement instruction
