6
7
Take a picture or make note of
the current wiring for reference.
Mercury Notice:
If your old thermostat
contains mercury contact your local waste
management authority for information on
how to safely dispose of it.
When replacing an existing thermostat,
position your new
Clear Comfort® Pro
thermostat in the same location as your
old one, unless the conditions that follow
suggest otherwise. For a new installation,
follow these guidelines for placement:
• Place the thermostat in a room or hallway that
is used often; position on an inside wall about 5'
(1.52 m) from the floor.
• Avoid installing the thermostat in overly warm
areas (e.g., near a television, lamp, radiator, or
fireplace), in direct sunlight, or
on a wall that has hot water pipes or that is
opposite a stove.
1
Switch Off Power
Turn off the power to the heating
and cooling equipment.
2
Remove Cover
Remove the front cover from the
old thermostat.
TIPS FOR INSTALLATION
INSTALLING YOUR THERMOSTAT
• Avoid installing the thermostat in
overly chilled areas, such as in a drafty area (e.g.,
stairwell, door, or window),
on a wall separating an unheated room,
or where air circulation is poor
(e.g., in a corner or behind a door).
• Avoid installing the thermostat in damp areas, as
this can lead to corrosion.
• Do not install the thermostat until construction
work is complete, the area is dust free, and
painting is completed.
• If the thermostat housing is cold, wait for it to
reach room temperature before installing.
Y W
G
0/B
Y W
RC
R
G
R
