DripMaster
16
17
DripMaster
®
SECTION
6
CONTAINER PLANTS AND SHRUBS
Replacing hand watering with Drip-Irrigation
1
Connect an 8-Port or a 4-Port Adjustable Manifold to an exposed shrub
riser. If a vacant riser is not available, use a Saddle Adapter to connect to the
sprinkler line.
2
Remove Caps and attach ¼" Distribution/Supply Line to each ¼" Barb.
3
Run each ¼" Distribution/
Supply Line to each container. Use
¼" Tube Straps to hold tube in place.
(Window boxes and large containers
may require more than one line.)
IMPORTANT: A single ¼"
Distribution/Supply Line should
not exceed 30'.
4
Flush lines to clear any debris.
5
Select the appropriate Drip-
Irrigation Dripper for each container
and plant.
Common Retrofit Projects
1
2
SECTION
6
HANGING BASkETS AND WINDOW BOxES
Use Orbit’s
®
FlexMist
™
(part # 66190) or Adjustable Mist
Sprayer (part # 66191 or 67191).
POTTED PLANTS
Use Orbit’s
®
Multi-Stream on a Stake
(part # 66105, 67105 or 68105) or
a Micro-Bubbler on a Stake (part #
67110).
SHRUBS
Use Orbit’s
®
Low-Volume Sprinkler
Head on 12" Stake. (See Parts List
at end of manual for spray pattern
options)
6
Adjust the flow rate by
turning the flow control screw.
Continued on next page
Common Retrofit Projects
Flow
Control
6
Orbit
®
DripMaster
®
|
Installation Guide
Orbit
®
DripMaster
®
|
Installation Guide
