6
7. Attach oriented hook (13) and steel spacer (34) to seat tube (3) with bolt (M10x90mm)(15), washer (26),
washers (31) and locknut (23). Attach rubber cushion (56) to the back of leg-kicking frame (39).
Connect seat tube (3) and leg-kicking frame (39) with bearings (70), bolt (M10x80mm)(14), washers (27) and
locknut (24). Attach leg-extension connecting cover (37) to leg-kicking frame (39) with bolt (M12x80mm)(18),
washers (26) and locknut (23). Slide tube (79) through the leg-extension connecting cover (37), slide the
bolsters (61) onto both end of the tube, block with leg-kicking sofa hole covers (52) and plastic end caps (53).
Attach backrest adjusting bushing (18) to backrest tube (5) with bolt (M10x50mm)(9), washers (26) and locknut
(23). Connect narrow single pulley fork (12), pulley (73) and pulley limiting board (17) with bolt (M10x50mm)
(9), washers (26) and locknut (23).
Summary of Contents for MAX 2B
