BROADBAND
I N N O VAT I O N
4. Prepare for Use
a. Refill the tank with your chemical solution.
b. There is a power switch which is located on the left side of the base of the
tank next to the outlet for the power supply charger.
c. The power switch on the base must be turned on before the power switch at
the handle is turned on.
d. Turn on the electrostatic function but turning on the orange switch on the
handle. The orange switch is what keeps the unit in electrostatic mode.
e. Turn on the sprayer and run for 30 seconds to one minute to purge the lines
of any remaining testing water or cleaning solutions used previously
f. Begin using your sprayer.
2. Test spray.
a. Open the cap of sprayer tank fill cover
b. Add a small amount of water into the tank for testing
c. Turn on the power switch on the tank and then turn on the
power switch on the handle
c. test for a minute or two to make sure there are no leaks at all of the joints,that
the pressure is normal and that you have selected the appropriate nozzle for
the type of work that you are doing.
d. Once the adjustments above have been completed, empty the water
from the tank.
06