10 Machining the pipe
Operating instructions BRB
58
(08.10)
MT_BRB_BA_04_790086762_00.doc
orbitalum tools
gmbh
10 Machining the pipe
Because operation of our BRB machines is largely identical, the figures in this
chapter show the steps to be carried out only using the example of a BRB 4
machine.
Danger of bodily injury by trapping fingers between clamping wedges
and pipe!
Clamping wedges trap fingers.
Do
not
put your fingers between the clamping wedges and the pipe.
BRB Electric:
Pulling the plug as an EMERGENCY STOP is not correct!
Diverse risks.
Do
not
use cables bent at right angles.
Under
no
circumstances use blue, locking CEE plugs..
Ensure that the plug is easily accessible.
Simulate an emergency by trying to loosen the plug from a distance.
Risk of falling when screwing cutters into clamping wedges!
The machine can become detached from the pipe and fall to the floor
unchecked.
Always return the feed unit to the starting position with the motor switched
off.
Hot surfaces!
Risk of burns.
Do
not
touch the pipe surfaces or the cutters.
Vapor when working with lubricants!
Damage to lungs, skin and the environment.
Use only KSS-TOP lubricant.
Poor lighting!
Diverse risks.
Ensure that the minimum lighting rating is 300/200 lux (working area/
surrounding area).
Note
WARNING
WARNING
ATTENTION
ATTENTION
ATTENTION
ATTENTION
