Maintenance and troubleshooting
ORBIMAT 180 SW
| Operating instructions
78
orbitalum tools
GmbH, D-78224 Singen, www.orbitalum.com, Phone +49 (0) 77 31 792-0
(17.09.18) OW_ORBIMAT_180SW_BA_850060202_00_EN
10.2.1
Storage
X
If the machine will be unused for a longer period of time, dismantle the machine and store it in a suitable place.
X
Recommendation: Carry out the following activities before storage:
1. Clean the machine.
2. Remove the coolant.
For this purpose, loosen the coolant return line of the weld head on the back of the unit and
pump out the coolant supply into a container with the pump.
Storage conditions
• Relative humidity
<70%
• Temperature range:
-20 ... +40 °C, protected from dust
10.3 Servicing/Customer service
To order spare parts, refer to the separate spare parts list.
For troubleshooting, please contact the branch responsible directly.
Please indicate the following details:
• Type of machine: ORBIMAT 180 SW
• Machine No.:
(see type plate)