6 Operation
Operating instructions SCORP
12
(06.07)
MT_SCORP_BA_04_790014762_09.doc
orbitalum tools
gmbh
6 Operation
Danger of death by electric shock!
If the mains cable is damaged, live parts may cause death when being touched
directly.
:
Keep the mains cable of the motor away from the saw blade or cutting disc.
X
While processing the pipe, always keep an eye on the position of the mains
cable.
Unintentional operation of the ON/OFF switch.
X
Pull out the mains plug before carrying out any adjustment, repair and
maintenance work or changing the tool and allow the machine to run a
stop.
X
Before attaching the SCORP, examine whether the motor is locked in the
upper position (out of cut).
6.1
Mounting and changing of saw blades
Material damage
A distorted, blunt or otherwise damaged saw blade / cutting disc can damage
the electric motor of the SCORP.
X
Regularly check the condition of the saw blades / cutting discs, replace
when needed.
X
Saw blades / cutting discs must be free from swarf and clean.
X
Only use saw blades and cutting discs from Orbitalum Tools.
X
Install saw blade / cutting disc so that the inscription is visible.
1. Remove the fixed protection panel by loosening both locking screws (1).
DANGER
Attention
Removal of saw blade/
cutting disc
1
1
Summary of Contents for SCORP 220 Plus
Page 27: ......