Operating instructions SCORP
7 Maintenance
orbitalum tools
gmbh
(06.07)
MT_SCORP_BA_04_790014762_09.doc
21
7 Maintenance
Danger of death by electric shock!
Non-observance could result in death or critical injury.
X
Pull out the mains plug before performing any maintenance work.
Time Activity
Before starting work
X
Check the saw blade / cutting disc, exchange if necessary.
At each cleaning
X
Plastic parts:
– For the cleaning of the plastic parts only use a soft rag and mild
detergents.
Do not use solvents or intense detergents, since it can damage the
plastic parts or coated surfaces.
X
Clean the insides of the fixed and moveable protection housing.
X
Fixing clamps (see fig. below):
– clean with compressed air,
– lubricate the axles of the roles (1) and the joints (2),
– lubricate the screw (3) and the two lock nuts (4).
X
Regularly clean the louvers of the engine.
At each material change
(e.g. from plastic to metal
pipes)
X
Clean the insides of the fixed and moveable protection housing.
DANGER
Summary of Contents for SCORP 220 Plus
Page 27: ......