Operating instructions SCORP
1 Notes on safety
orbitalum tools
gmbh
(06.07)
MT_SCORP_BA_04_790014762_09.doc
3
1 Notes
on
safety
The SCORP is a state-of the-art machine. Using it for purposes other than
those described in this manual may cause injury to the user or to others.
It may also damage the machine or other equipment.
Therefore:
•
Always ensure that the machine is in good working order and comply with
these notes on safety.
•
Keep complete documents close by the machine.
•
Generally valid regulations for the prevention of accidents must be
observed.
1.1 Proper
use
•
Only use the SCORP for cutting of pipes.
•
For damages caused by using not according to regulations is just the user
responsible.
1.2 Safety
regulations
•
Only use the dimensions and materials specified in these instructions.
Other materials should only be used after consulting the Orbitalum Tools
customer service department.
•
Only use authentic Orbitalum Tools saw and cutting blades, spare parts
and materials.
•
Check the SCORP daily for any externally visible damages or defects.
Have any damages or defects repaired immediately.
•
Work on the electrical equipment should only be carried out by a qualified
electrician.
•
Pull out the mains plug before carrying out a tool change or maintenance
and repair work.
Summary of Contents for SCORP 220 Plus
Page 27: ......