Página 21 de 27
Firmware Upgrade
Picture11 Upgrade Firmware
You can install a new version of the Wireless Outdoor Bridge's software using the Firmware
Upgrade page.
Warning: Once you click Upload do NOT interrupt the process of sending the
software to the Wireless Outdoor Bridge and restarting the Wireless Outdoor Bridge.
To upgrade the Wireless Outdoor Bridge software:
1 Download the new software.
2 If not done automatically, uncompress the downloaded file. If included, read the Release Notes
before continuing.
3 Click Browse.
4 Locate and select the file you just downloaded and uncompressed from your local hard disk.
5 Click Upload to send the software to the Wireless Outdoor Bridge. This loads the new
software into the Wireless Outdoor Bridge and causes the Wireless Outdoor Bridge to restart.
Notice: Do not try to go online, turn off the Wireless Outdoor Bridge, shutdown the
computer or do anything else to the Wireless Outdoor Bridge until the Wireless
Outdoor Bridge finishes restarting! When the Test light turns off, wait a few more
seconds before doing anything.
6 Click General and check the Firmware Version to verify that the Wireless Outdoor Bridge now
has the new software installed.
Summary of Contents for OBT-58108
Page 1: ...Página 1 de 27 ...